Game Idealist
Menu
Game File SizesError CodesHardwareGuides
PlayStationXboxNintendoPC
News · PS4 · Xbox One · PC

Thrustmaster's Calibration Tips for Project CARS on PS4 and Xbox One

Following the release of Project CARS, Thrustmaster provided official setup and calibration instructions for its racing wheels on PlayStation 4 and Xbox One.

Published
Read
2 min
Thrustmaster's Calibration Tips for Project CARS on PS4 and Xbox One — News on Game Idealist

Shortly after the release of Project CARS, Thrustmaster published tips for players using its racing wheels on PlayStation 4 and Xbox One. The company provided specific instructions to ensure proper setup and calibration for a better driving experience in the racing simulator.

PlayStation 4 Wheel Setup and Calibration

Thrustmaster confirmed that Project CARS on PS4 is compatible with the T500, T300, T80, and T100 racing wheels. Of these, the T300 and T80 models offer full support within the console’s system menu. The company recommended a plug-and-play setup process for all compatible wheels:

  1. Connect the steering wheel’s USB cable to the console when the PS4 menu is displayed. For the T300 and T80, the base switch must be set to the “PS4” position first.
  2. For the T300 and T80 models, press the “PS” button on the wheel to assign it to a user profile.
  3. Launch the game using a standard gamepad. The T300 and T80 can also be used to start the game.
  4. Once the game’s start screen appears, press the X button on the racing wheel to proceed.
  5. The wheel is now ready for use. Thrustmaster advised keeping the gamepad powered on to use its speaker functions during gameplay.

To fine-tune performance, players can calibrate their wheel from the in-game menu. This process helps match the wheel’s rotation to the cockpit view of the cars.

  1. Navigate to OPTIONS > CONTROLS.
  2. Press the Square button on the wheel to begin calibration.
  3. Follow the on-screen instructions, setting the steering lock to the correct value for the specific wheel model:
    • T300: 900°
    • T500: 1080°
    • T100: 240°
    • T80: 240°
  4. Press the X button to save the settings. The game will then automatically adjust the steering lock for each car.

Xbox One Wheel Calibration and Settings

For Xbox One players, Thrustmaster provided calibration steps for its TX Racing Wheel and Ferrari 458 Spider Racing wheel. The process is similar to the PS4 version and is intended to improve gameplay by syncing the wheel’s rotation with the in-game vehicle.

  1. Go to the OPTIONS > CONTROLS menu in Project CARS.
  2. Press the X button (Cross button) on the wheel to start the calibration utility.
  3. Follow the on-screen prompts, setting the steering lock as follows:
    • TX Racing Wheel: 900°
    • Ferrari 458 Spider Racing: 240°
  4. Press the A button on the wheel to save the calibration.

Thrustmaster also detailed how to adjust force feedback settings for the TX Racing Wheel. In the OPTIONS > CONTROLS > CONFIGURATION menu, players can access the CALIBRATE FORCE FEEDBACK tab by pressing the right trigger (gas pedal). In this sub-menu, increasing the Tire Force value will enhance certain force feedback effects, providing more detailed road feel.

Project CARS was released on May 12, 2015, in North America and May 7, 2015, in Europe for PC, PlayStation 4, and Xbox One.

Frequently asked questions

Which Thrustmaster wheels work with Project CARS on PS4?

According to Thrustmaster, the T500, T300, T80, and T100 racing wheels are compatible with Project CARS on the PlayStation 4. While all four models work in-game, only the T300 and T80 are fully supported for navigating the PS4's main system menu. The other models require a standard controller for system-level navigation before launching the game.

How do I calibrate my Thrustmaster wheel in Project CARS?

To calibrate your wheel, go to the in-game Options menu and select the Controls tab. Press the designated button on your wheel (Square for PS4, X for Xbox One) to start the calibration process. Follow the on-screen instructions to turn the wheel to its maximum rotation and set the correct steering lock value for your specific model.

What are the correct steering lock settings for Thrustmaster wheels in Project CARS?

Thrustmaster provided specific steering lock values for calibration. For PS4, set the T300 to 900°, T500 to 1080°, and both the T100 and T80 to 240°. For Xbox One, the TX Racing Wheel should be set to 900° and the Ferrari 458 Spider Racing wheel to 240°. These settings ensure the in-game steering matches the physical wheel's rotation.

How can I adjust force feedback on my Xbox One wheel for Project CARS?

For the Thrustmaster TX Racing Wheel on Xbox One, force feedback can be adjusted in the game's settings. Navigate to Options, then Controls, and select the Configuration tab. From there, press the right trigger to open the Calibrate Force Feedback menu. Increasing the 'Tire Force' setting will amplify specific force effects felt through the wheel.